Planar 2D
Planar is a 2D inspection machine that allows manufacturers to simply and quickly verify product quality by performing 2D inspection, CAD comparisons & reverse engineering in seconds.
Product Overview
The system can be used for very quickly measuring or reverse engineering flat parts which have been manufactured on laser, plasma and water jet cutting systems as well as punched and some stamped parts. We have been supplying the Planar system to the sheet metal industry for over ten years during which time we have consulted with many major manufacturers to fully understand the requirements expected from our measuring system and integrating these into the Planar.
There are Planar machines installed and operating in more than 30 countries worldwide and the list of countries is growing. Planar customers range from small job shops to multi billion dollar turnover companies covering almost every industry that uses sheet metal such as electronics & communication industries, automotive and aerospace.
Planar is now fully integrated with QC Calc SPC Software
Speed & Accuracy
For speed we cannot be beaten by any other competing system. Planar can take up to 40 million measurements in 0.1 seconds. This makes our system the fastest in the world for both inspection and reverse engineering of flat parts. We also have the largest range of available models and accuracies available.
ISO 10360 guaranteed accuracy.
Reliability
No moving parts to wear or fail. Vibration and scratch proof operation.
Available in a range of sizes and accuracies the Planar can be installed on the factory floor and is easy for shop floor staff to operate helping to cut expensive inspection bottlenecks.
With addition of the OptiScan 3D the system offers unparalleled non-contact 3D inspection capacity.
Models
| Planar Model | Accuracy | Max Component Size (mm) | Max Component Weight (kg) | |||
|---|---|---|---|---|---|---|
| Shape** | SurfScan | Length | Depth | Height | ||
| P17.12 | 12/25μm* | 0.1mm | 500 | 333 | 120 | 100 |
| P43.100 | 100/200μm* | 0.3mm | 810 | 520 | 250 | 25 |
| P70.20 | 20/40μm* | 0.15mm | 1000 | 667 | 350 | 50 |
| P110.25 | 25/50μm* | 0.15mm | 1276 | 851 | 350 | 200 |
| P150.35 | 35/70μm* | 0.2mm | 1500 | 1000 | 350 | 250 |
| P220.35 | 35/70μm* | 0.25mm | 1830 | 1220 | 350 | 400 |
| P360.35L | 35/70μm* | 0.25mm | 3000 | 1220 | 350 | 500 |
| P370.50 | 50/100μm* | 0.3mm | 2355 | 1570 | 350 | 500 |
Planar 2D Models
Key Features
Largest Range of Models Available
Planar comes in a large selection of machine sizes. We can measure parts up to 3000mm x 1220mm (118" x 48") or 2355mm x 1570mm (93" x 62") in size at accuracies between +/- 12 microns and +/-100 microns (+/- 0.00047" to +/- 0.0039").
Inspect Parts Quickly and Automatically
Place a part on the table and with a single click or scan of a barcode within 15 seconds the Planar software can produce a full inspection report.
Ultra Fast Reverse Engineering
The world’s fastest system for reverse engineering flat parts.
SPC Integration
Inspecvision Planar systems can be fully integrated with QC Calc SPC software.
3D Scanning Add On
Add 3D scanning capability to Planar with the retro-fittable Opti-Scan3D module.
Optical CMM Add On
Add Micro-Probe option to the Planar for touch probe capability.
O-Ring Inspection
With minimal setup time Planar will in 0.1 seconds measure hundreds or even thousands of o-rings at a time, at 12 microns. The system then help you identify which o-rings have failed by overlaying the results onto an image of the measurement table.
Convert Paper Drawings to CAD
Convert paper drawings into CAD files using Planar and optional third party software.
Applications
Sheet Metal Inspection
A sheet metal inspection and reverse engineering solution using the InspecVision Planar2D - the worlds fastest 2D measurement system.
Electrical Laminations Inspection
A lamination inspection solution within the Electric Motors, Alternators and Transformer Manufacturing industries using the InspecVision Planar2D.
Gasket and Seal Inspection
A Gasket and Seal Inspection solution for Engine & Pump Manufacturers.
O-Ring Inspection
An o-ring inspection solution within the Elastomer Seals Manufacturing industry using the InspecVision Planar2D
In Line Inspection
Measure your parts in-line with Planar. Using CNC robotic arms and specially designed software you can completely automate the inspection process. Please contact us for more information.
Convert Paper Drawings to CAD
Convert paper drawings into CAD files using Planar and optional third party software.
Case Study
Whitwam Precision Components Ltd (WPC) specialise in subcontract CNC component manufacture to the Aerospace industry and currently produce around five thousand components for the aerospace industry every week. Whitwam works “exclusively as a sub-contractor for larger suppliers within the Aerospace Industry”, they have supplied parts that have been supplied to Airbus, Boeing, Hawker Siddeley, Eclipse Aviation, AIM Engineering and Embraer.
Downloads
Specialists in the design and manufacture of computer vision-based measurement systems for industrial applications
Book an online product demo of any or all of our systems
